JUICE CHARGER me 3 | 11kW / 22 kW with meter & WiFi antenna

JUICE CHARGER me 3 | 11kW / 22 kW with meter & WiFi antenna

Simply connect and get started

The JUICE CHARGER me 3 with MID meter is available as an 11 kW and a 22 kW version and its performance can be adjusted free of charge via a software update. In addition to an Ethernet connection, the charger has WiFi for communication with the backend and for over-the-air software updates.

The wallbox is connected in no time at all and can be mounted on the wall in the traditional way - on or under the plaster. It can also be mounted on a separately available pedestal, either individually or in pairs. The charger is "plug and play" compatible: it is completely preconfigured at the factory and no additional settings need to be made. This makes the JUICE CHARGER me 3 easy to install and ready for use by the customer straight away.

A 5 m long cable provides the necessary flexibility. Behind the front made of scratch-resistant, internally printed and replaceable acrylic glass there is a tightly screwed inner housing. This is completely waterproof and dustproof according to IP67 and highly shock-resistant according to IK10. This makes the charger equally suitable for indoor and outdoor use.

The wall charging station is designed for the "Plug and Charge" standard. For all vehicles that already meet the ISO 15118 standard and have previously been registered with the vehicle ID on the charger, the charging process can be activated automatically when the charging plug is connected to the vehicle socket. Alternatively, activation is also possible via an RFID reader located behind the front panel.

Local dynamic charging management is on board for up to 250 charging stations. The JUICE CHARGER me 3 is also available with a directly readable, MID-compliant meter. For direct connection to power rails or ribbon cables, the wallbox is optionally available with a built-in FI/LS (residual current/circuit breaker).

The JUICE CHARGER me 3 is …

… a “plug-and-play” device: The charging station is delivered completely preconfigured from the factory and is ready for use immediately without any further settings.
... for "Plug and Charge"-capable cars with the ISO 15118 standard. After plugging the charging connector into the vehicle socket, the JUICE CHARGER me is activated and begins to charge.
… for all other vehicles is equipped with an RFID reader and is delivered with two pre-programmed RFID cards.
... designed for master-slave operation from two to 250 units. One device is responsible for evenly distributing the available power to all other stations.
... already equipped with the standardized interfaces (Modbus/TCP, Modbus/RTU, EEBUS) for the latest generation of smart homes. This enables, for example, charging with electricity from the home photovoltaic system or external load management control.
… suitable for indoor and outdoor use thanks to IP67 and highly shock-resistant according to IK10.
... can be attached to the wall or - individually or in pairs - mounted free-standing on a separately available pedestal. For wall mounting, a bracket for the Type 2 vehicle coupling is included in the scope of delivery.

What do you need the JUICE CHARGER me 3 for?

1. For price-conscious users who do not want to compromise on design and functionality.
2. For easy charging via “Plug and Charge”, the current and future charging standard.
3. For user-friendly operation indoors and outdoors. No illegible display, but three brightly lit icons show the current status.